TECNO 140 SLIDE TT

                                            Thermal break series.
Frame 143.5 mm.
Wing 60 mm.
Lift-and-slide over opening.
Suitable for windows and doors with one or more panels.                                        
                                            

TECHNICAL DESCRIPTION OF THE SYSTEM

Series: TECNO 140 SLIDE T.T.
Extruded aluminium alloy profiles: 6060 (UNI 9006-1)
Supply condition: T5
Dimensional tolerances and thickness: UNI 3879/UNI 755
Thermal insulation: is obtained using special 16 mm polyamide bars PA 66GF 25 that are inserted into suitable slots between the two sides of the previously knurled aluminium profiles and then secured on the outer aluminium side by rolling.
Commercial length of section bars: 6500 mm.

Standard dimensions:

  • Fixed frame section 143.5 mm for the 2 track system and 217.5 mm for the 3 track system
  • Wing frame section 60 mm
  • side and lower overlap of the mobile panel on the fixed frame 9 mm
  • upper overlap of the mobile panel on the fixed frame of 9 mm

Maximum width of glazing seat: 42 mm.
Locks: two or three point lock two or three point lock with possibility to fit a cylinder key for external opening.
Sliding: carriages with 300 kg maximum capacity on stainless steel guide positioned inside the lower tracks. Possibility of higher capacities with paired carriages.
Use: the SLIDE 140 T.T. PLUS system is suitable for the construction of windows and sliding doors with thermal break and two, three, and four panels using the fixed two track frame or three or six panels using the three track frame.

TECNO 140 SLIDE T.T. series must be surface treated observing criteria of directives, in order to obtain the Qualanod mark for anodising and Qualicoat mark for painting; in any case the maximum temperature of 190° C must not be exceeded for more than 15 minutes, so as not to affect the mechanical and dimensional characteristics of the polyamide bars.

 


TEST CERTIFICATE

Test report No. 258614/4468/CPD issued by the Istituto Giordano as a notified testing laboratory (No. 0407) according to Directive 89/106/EEC (CPD).

Results obtained:

Type of test Class
Permeability to air under pressure 4
Permeability to air in vacuum 3
Water tightness 6A
Resistance to wind load C4
Impact resistance I5


ATTACHED DOCUMENTS

  • Brochure
  • Certifications
TECNO 140 SLIDE TT - Performance certification
Download this document:
  TECNO 140 SLIDE TT - Performance certification
Filesize: 14205.83 KB Last mod.: 18-03-2013 11:49:19 Downloads: 0
TECNO 140 SLIDE TT - Thermal transmittance certification
Download this document:
  TECNO 140 SLIDE TT - Thermal transmittance certification
Filesize: 34231.87 KB Last mod.: 18-03-2013 11:51:27 Downloads: 0

OUR WORKS


WORKS PHOTOGALLERY

More information? Search for your local agent.

User Login

To enter the website please fill the login data and click on the LOGIN button.