TECNO 116 SLIDE TT
Thermal break series
Frames 89,6 mm with 2 tracks - 115,6 mm with 3 tracks - 50,6 mm monorail 50 mm door with glazing bead sliding
Lift-up opening and sliding
Suitable for marking windows and doors with one or more doors.
TECHNICAL DESCRIPTION OF THE SYSTEM
Series: TECNO 116 SLIDE TT
Extruded aluminum alloy profiles: EN AW 6060
Supply condition: T5
Dimesional tolerances and thicknesses: UNI 755
Thermal insolution: it is obtain by connecting the aluminum extrusions to each other with complanar goemetry strips in Low Lambda PA 66 GF 25 of 20 mm for frames and 32 mm for doors.
Commercial lenght of section bars: 6500 mm
Standard dimensions:
- fixed frame section 89,6 mm with 2 tracks - 115,6 mm with 3 tracks - 50,6 mm monorail 50 mm
- section of the mobile door mm 50
Maximum seat width for glazing seat: 42,2 mm
Locks:Single or multiple, with hammers and/or trays encased on the doors
Sliding: with trolleys with a maximum capacity of 200 kg capacity per leaf
Use: you can build sliding doors and windows with two, three on four leaf doors using a fixed 2 track frame; three or six door types using the fixed frame with 3 tracks, four or eight door types using a 4 track frame.
TECNO 116 SLIDE TT series thermal breack profiles must be treated superficially observing the criteria provided by the directives for obtaining the Qualanod mark for anodizing and Qualicoat for painting; in any casa the max temperature must not be exceeded of 190°C for over 15 minutes, in order not to affect the mechanical and dimensional characteristic of the poliamide bars.
