TECNO 76 TT

SYSTEM DATA SHEET

Series: TECNO 76 TT
Extruded alloy profiles: 6060 UNI 3569
Dimensional tolerances and thickness: 1/2 UNI 3879
Type of air-water seal: Open and overlap joint
Thermal break: Made with two 32 mm continuous polyamide rods with reinforced glass fibre.
Glass application: With standard or rounded glazing bead with 45 or 90 degree cuts.
Glass cavity: Variable according to the profiles used. Maximum 60 mm.

Standard dimensions of the system:

• Fixed frame section 68 mm.
• Panel section 76 mm.
• System with two extruded aluminium profiles secured by two polyamide rods with reinforced glass fibre.
• Joint between fixed and mobile frame 5 mm.
• Joint on the central point 5 mm.
• Glass stop tongue 22 mm with the possibility of a rounded end.
• Wall stop tongue minimum 22 mm.

Use: the system is suitable for the construction of thermal break windows, French doors and main doors with one or more hinged panels. With the complete range of accessories, bottom hinged, top hinged, awning, tilt, and monoblock windows can be made.

TEST CERTIFICATE

Test reports No. 265404/4905/CPD, No. 276873/5718/CPD, No. 276874/5719/CPD and No. 265283/4894/CPD issued by the Istituto Giordano as a notified testing laboratory (No. 0407) according to Directive 89/106/EEC (CPD).

Results obtained:

Type of test	Class
Permeability to air under pressure	4
Permeability to air in vacuum	4
Water tightness	8A
Resistance to wind load	C5
Resistance to static torsion	passa
Acoustic certificate	Rw= 43 db Rw= 45 db

Thermal transmittance:	Class
With “Ug” of the Termix glass channel	1,0 w /(m2 x k)
Achieves “Uw” window	1,5 w /(m2 x k)
“Uw” French door	1,4 w /(m2 x k)

ATTACHED DOCUMENTS